Dandy Bar Pullbar by JDM

Dandy Bar Pullbar by JDM
Click to enlarge
Sale Price: $325.00
Compared at: $349.99
You Save: $24.99
Product ID : Dandy
E-mail to a friend



The Dandy bar has now been APPROVED BY IMCA. It is a 2 way true 3 stage progressive biscuit bar. 3 biscuits on acceleration side and 2 on dampening. Pull range is 500lbs at 1/4"of preload to 4000 lbs at 1.5" of travel. Overall length from center of heim to end of shaft is 15.5". Only 2"in diameter The first true 3 stage progressive pull bar to hit the market. Using small diameter, quick reacting bushings, and the dandy bar gets you out of the turns harder than any other bar. Because the biscuits are in an enclosed housing, it vastly reduces expansion, stretching, and cracking of biscuits, allowing you to run 15-25 nights on one set. The acceleration and braking sides are both pre-loaded against each other at the same rates to make for a smooth transition on and off the gas without the need of a 90/10 shock. Legal for both UMP and IMCA Late Models or Modifieds. Biscuits enclosed in housing making excessive wear and stretching on the biscuits impossible. It will eliminate all the weight and expense of the lift arm, 5th and 6th coil and wrap-up shock. One handed pinion angle adjustment. Adjustable preload. Will get you quicker and firmer response on acceleration and breaking. For faster corner exit and much higher speed corner entry with consistent handling and traction throughout. Completely CNC machined

Product Reviews

Login or Register to write the first review.

Products You May Like

Complete Sixth Coil Assembly
Standard Secondary Spring Torque Link Bar