Categories

Manufacturers

Newsletter

Wilwood 160-0471 Ultralite 32 Vane Vented Iron Rotor, 11.75 x .810 In.

Wilwood 160-0471 Ultralite 32 Vane Vented Iron Rotor, 11.75 x .810 In.
Click to enlarge
Sale Price: $33.99
Compared at: $39.99
You Save: $6.00
Product ID : WIL160-0471
Manufacturer: Wilwood
E-mail to a friend

Purchase

Description

Every Wilwood brake rotor is cast from premium grade, long grain carbon iron. This material exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. Combining the correct face thickness with a 32 vane casting provides superior heat management and long service life with low rotating and unsprung weight. The straight vane design also makes it possible to use the same rotor on left or right hand mounting locations. Ultralite Rotor Application Chart (GIF) Item Details 8 on 7.00" Thru 8.00 lbs. Notes Proper Break-In Procedure for Steel or Cast Iron Rotors New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component. Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage. Specs Thickness: .81" Outside diameter: 11.75" # Holes: 8 Bolt Circle: 7.00" Thread: Thru Weight: 8.0 lbs 32 Vanes

Product Reviews

Login or Register to write the first review.

Products You May Like

Caliper bracket for hybrid rotor
$24.99
$19.99
Brakes Line Tab (4 PACK)
$7.99
$5.99
10mm Banjo To -4 (2-Pack)
$14.99
$12.99
Superlite Poly-E Brake Pads
$129.99
$114.99